4" Submersible Pump JT4F60-E13

PUMP SPECIFICATIONS

Casing: Gray Iron 30.
Impeller: Single Vane, Gray Iron 30.

JT4F60-E13

Handles 3.15″ (80 mm) Diameter Spherical Solids.Seal Housing: Gray Iron 30.
Lower Bearing Bracket: Gray Iron 30.
Motor Housing: Gray Iron 30.

Motor Shaft: Stainless Steel 329.
Upper Bearing: Single Ball Type, Grease Lubricated.Lower Bearing: Double Ball Type, Grease Lubricated.O-Rings: Nitrile Rubber.
Hardware-External Wetted: Stainless Steel 316.External Surface Protection: Epoxy Paint.
Standard Equipment: Hoisting Bail. Stand.

4″ (101 mm) Barbed Hose Connector.Optional Equipment: Pump Control Panel.

MOTOR/CABLE SPECIFICATIONS

Motor: 60 Hertz, 1750 R.P.M., Inverter Duty Rated (VFD-Capable), Air Filled Enclosure, Squirrel Cage, Induction Start, G-R Frame 4, Class F Insulation Rated 311_F (155_C), 104_F (40_C) Ambient Plus 207_F (115_C) Tempera- ture Rise. Max. Submergence Depth 65 Feet (20 Meters).

13 H.P., 200, 230, 460 or 575 Volts, Three Phase, 41.4/36.0/18.0/14.4 Full Load Amps, NEMA Code H, 1.15 Service Factor.*