Sub Pump 4"x4" S4C1 SlimLine 230V 10HP

Suction: 4"

Discharge : 4"

For drilled wells, narrow cofferdams and hard-to-reach places, Gorman-Rupp’s Slimline submersible pumps are lighter and easier to handle than their larger Widebase cousins. Even so, there is a strong family resemblance: Gorman-Rupp puts extra protection into the seals, and the impeller is rugged and dependable.

High Head, High Volume Solutions

Compact Design

Gorman-Rupp Slimline Submersibles are designed for cramped quarters and hard-to-reach places where other pumps can’t go. They’re light in weight, which makes handling and installation simple. And these pumps have only two moving parts and three wearing surfaces so maintenance and repairs are minimal.

Dual Seals, Double Protection

Primary seal keeps dirty water in the pump end and prevents contamination of the oil cavity. A second “fail safe” seal provides extra protection against the possibility of damage to the motor. Positive oil lubrication enables the pump to run dry without seal damage.

Abrasive Handling Impeller

Abrasion resistant ductile iron impellers stand up to sand, gravel and other abrasive materials. The fully shrouded impeller back reduces seal pressure and helps prevent foreign material from entering the seal cavity. Seal life is extended and operational life of the pump is increased. Optional impellers of CD4MCu are available for corrosive/abrasive applications.

Sub Pump 4"x4" S4C1 SlimLine 230V 10HP Brochure

Sub Pump 4"x4" S4C1 SlimLine 230V 10HP Operators Manual

Sub Pump 4"x4" S4C1 SlimLine 230V 10HP Control Box Manual

Sub Pump 4"x4" S4C1 SlimLine 230V 10HP

Suction	4"
Discharge	4"
Solids Handling	0.38" (10 mm)
Maximum Operating Pressure	69 psi
Motor	10 H.P.
R.P.M.	3450
Drive Type	Electric
Power Requirements	Three Phase
Volts	230
Hz	60
Amps Full Load	13.6
Power Cable	6 Wire; Type GGC; 8 AWG. 3 Power Conductors, 2 Ground Conductor and 1 Ground Check.
Recommended Generator Size	20 kW Across the Line Start
Weight	269 lbs
Electrical Control Box	Yes

Categories