PAH4B60-4045H 6X4 HIGH PRESSURE

Suction: 6"

Discharge: 4"

Click on logo for manufacturers site

Prime Aire® Priming-Assisted Pumps

Gorman-Rupp’s extensive line of Prime Aire® priming-assisted pumps are hard-working, dependable and ready to tackle the toughest applications including large solids and slurries.

The Prime Aire system uses a venture compressor priming chamber and priming valve which eliminates the leaks associated with traditional vacuum-assisted pumps. This unique system reduces environmental concerns and enables the pump to operate under flooded suction conditions without leaking. The positive priming capabilities of PA Series® pumps make them the perfect choice for applications where a large volume of air is in the liquid being pumped, there are intermittent flows or oversized suction lines.

Rent or Purchase Request Demo Questions?

Dry Run Capability

A dry run capability is designed into the Prime AireÂ® system. An oversized, oil-lubricated mechanical seal allows the pump to run dry continuously without damage. For positive, reliable priming time after time, Gorman-Rupp Prime Aire pumps are the ones you can count on.

Dual-Suction Side Capability

Model PA 4×6 features a removable cover plate and adjustable/replaceable wearplate.

Compressor-Over-Pump

Several popular Prime AireÂ® models are available in a “Compressor-Over-Pump” arrangement. This innovative configuration offers a compact, flexible design while allowing ease of operation and servicing when needed.

Abrasive Handling Seal

Prime AireÂ® pumps are equipped with oversized, mechanical, oil-lubricated, double-floating, self-aligning seals with silicon carbide rotating and stationary faces that are designed to take the wear and tear of pumping solids, slurries and other abrasives.

Standard Auto-Start Controls

Auto-Start control starts and stops the pump in response to a liquid level. The pump only starts when there is water to pump and turns itself off when the water reaches the desired level. There is never any need to waste fuel and add to costly engine overhauls.

Prime Aire® pumps feature Gorman-Rupp’s patented priming system. The system uses a venturi and compressor, eliminating the leaks associated with traditional vacuum-assisted pumps. An oversized, oil-lubricated mechanical seal allows the pump to run dry continuously without damage. For positive, reliable priming time after time, Gorman-Rupp Prime Aire pumps are the ones you can count on.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

PA 4"x6" Pump Brochure.pdf

PA 4"x6" Pump Operators Manual

PAH4B60-4045H

Suction	6"
Discharge	4"
Solids Handling	3"
Casing	Ductile Iron
Impeller/Rotor	Ductile Iron
Seal Material	Silicon Carbide
Flange	Bauer
Drive Type	Diesel Engine
Unit Weight	3923 LBS
Speed	1500 - 1900 rpm
Gallons Per Minute	1900
Fuel Tank	88 Gallons
Run Time Full Load	17.9 Hours