EZ Drill Single Gang

Air hose size from air compressor :  1"
Lower Length (A):  46 in (116.8 cm)

E-Z Drill’s single gang dowel pin drills are an effective solution for projects ranging in size from several hundred to a few thousand holes. Available as on-grade or slab rider units, the drills are ideal for a variety of tasks including lane additions on highways, airports or bridges, full depth concrete road repair and any application where drilling into concrete is required. These dowel pin drills are pneumatically driven and can easily drill up to 18 inches deep and are compact enough to drill within 6 inches from a corner. For added versatility, the single gang slab riders are ideal for stitching applications and skew drilling. It also adjusts easily to vertical drilling.

Single-GANG CONCRETE DRILLS

With the 210B SRA slab rider, you can stitch or drill horizontally, vertically or at an angle with exceptional accuracy and no disturbance to the subgrade. The unit can drill 5/8- to 2-1/2-inch-diameter holes to 18-inch depths, and it has an auto-alignment feature that tracks the hole placement level for fast and easy repositioning. A roller bearing feed system provides friction-free drilling for longer wear life, less maintenance and minimized downtime.

Horizontal Position
Air hose size from air compressor 1"
Lower Length (A)46 in (116.8 cm)
Lower Length (A) + (C)94 in (238.8 cm)
Cart Length (C)48 in (121.9 cm)
Wheel Base (D)42 in (106.7 cm)
Width32 in (81.3 cm)
Height32 in (81.3 cm)
Weight385 lbs (174.8 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground3 in (7.6 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of BitN/A
Drill Motor (pneumatic)CP 32A
Drill Motor Weigh54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)100 cfm (2.8 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Dust CollectionYes
Dust Collection Air Consumption 40 cfm
Vertical Position
Air hose size from air compressor 1"
Lower Length (A)N/A
Lower Length (A) + (C)73 in (185.4 cm)
Cart Length (C)54 in (137.2 cm)
Wheel Base (D)48 in (121.9 cm)
Width54 in (137.2 cm)
HeightVaries
Weight1,150 lbs (522.1 kg)
Drill Distance From CornerN/A
Drill Distance From Groundup to 12 in (30.5 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of Bit21 1/2 in (54.6 cm)
Drill Motor (pneumatic)CP 32A
Drill Motor Weigh54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)200 cfm (5.6 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (19.0 J)
Dust CollectionYes
Dust Collection Air Consumption40 cfm