| 
Call 24/7 (518) 465-1549 or (800) 613-4738
Click on logo for manufacturers site
E-Z Drill’s single gang dowel pin drills are an effective solution for projects ranging in size from several hundred to a few thousand holes. Available as on-grade or slab rider units, the drills are ideal for a variety of tasks including lane additions on highways, airports or bridges, full depth concrete road repair and any application where drilling into concrete is required. These dowel pin drills are pneumatically driven and can easily drill up to 18 inches deep and are compact enough to drill within 6 inches from a corner. For added versatility, the single gang slab riders are ideal for stitching applications and skew drilling. It also adjusts easily to vertical drilling.
With the 210B SRA slab rider, you can stitch or drill horizontally, vertically or at an angle with exceptional accuracy and no disturbance to the subgrade. The unit can drill 5/8- to 2-1/2-inch-diameter holes to 18-inch depths, and it has an auto-alignment feature that tracks the hole placement level for fast and easy repositioning. A roller bearing feed system provides friction-free drilling for longer wear life, less maintenance and minimized downtime.
| Air hose size from air compressor | 1" |
|---|---|
| Lower Length (A) | 46 in (116.8 cm) |
| Lower Length (A) + (C) | 94 in (238.8 cm) |
| Cart Length (C) | 48 in (121.9 cm) |
| Wheel Base (D) | 42 in (106.7 cm) |
| Width | 32 in (81.3 cm) |
| Height | 32 in (81.3 cm) |
| Weight | 385 lbs (174.8 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit | N/A |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weigh | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Dust Collection | Yes |
| Dust Collection Air Consumption | 40 cfm |
| Air hose size from air compressor | 1" |
|---|---|
| Lower Length (A) | N/A |
| Lower Length (A) + (C) | 73 in (185.4 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height | Varies |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | up to 12 in (30.5 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit | 21 1/2 in (54.6 cm) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weigh | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 200 cfm (5.6 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (19.0 J) |
| Dust Collection | Yes |
| Dust Collection Air Consumption | 40 cfm |
SINGLE-GANG CONCRETE DRILLS Brochure
